Lid included and induction ready.
Wall thickness: 1.0mm, bottom thickness: 4mm.
Two welded 1/2" NPT threaded ports
Bottom coupler 1.5" off the bottom, used for ball valve. Top coupler 6" off the bottom, used for thermometer.
Silicone dipped handles
Graduated marks inside and out
Available in 8 and 16 gallon sizes
1.0mm wall thickness
4.0mm bottom thickness
201 stainless steel
Will require 2 hex plugs (Item #5069) if not fitting with thermometer and valve.
Recommended Valves for this kettle are Item #5075 plus hex nipple Item #5025 or Anvil Valve Item #ANVVALVE
Recommended Thermometers for this kettle are Item #5038 or Item #5036